The Trilogy® SV is built on three variable-speed pillars: the compressor, the fan motor, and the water pump. They work together as one fully modulating system.
Three things set the SV apart from every other HVAC unit on the market:
- Fully variable performance. The SV reaches 47 EER on a ground loop at part load. That is the highest AHRI efficiency in the geothermal water source heat pump market.
- Advanced monitoring and diagnostics. EXM Advanced Variable Capacity Controls read smart sensors across the unit. The unit reports operating status, faults, and probable cause to the thermostat, the Wireless Service Tool, and the myUplink PRO web portal.
- Remote configuration. Dealers reach real-time operating data and fault history from any web-enabled device. They can also change unit configuration remotely.
FEATURES
Sizes and capacity
- Three sizes: 0930, 1248, and 1872
- SV0930 modulates between 9,000 and 30,000 Btuh
- SV1248 modulates between 12,000 and 48,000 Btuh
SV1872 modulates between 18,000 and 72,000 Btuh
Efficiency and refrigerant
- Exceeds ASHRAE 90.1 efficiency standards
- ENERGY STAR certified; ENERGY STAR Most Efficient 2026
- R-454B low-GWP refrigerant
- Refrigerant Detection System (RDS), optional on all three sizes
ACCESSORIES
- iGate® 2 Communicating (AWC) Thermostat with color touchscreen. Field installed. Four-wire connection. Integrated humidity control. Utility demand reduction. Displays faults with probable cause and troubleshooting guidance.
- iGate® 2 ClimaZone communicating zoning system. Up to 12 zones with two ClimaZone panels. Up to three dampers per zone. One AWC thermostat per zone. Configured through the Wireless Service Tool.
- Auxiliary electric heaters. Field installed. Supplemental and emergency heat.