Parker PR, Inc.
The next-generation TSM Series of heat pumps leapfrogs the industry to deliver the highest efficiency and the latest technology,said Raj Hiremath, marketing director at ClimateMaster.
Additionally, these new units feature the only communicating system on the market, providing advanced configuration and diagnostic capabilities, while also operating quietly and providing ultimate indoor comfort.Featuring optional iGate™ (DXM2) controls, TSM Series units offer 4-wire connections with an ATC thermostat. iGate™ controls additionally facilitate configuration, diagnostics and monitoring in Plain English on an ATC thermostat or ACD diagnostic tool.
The TSM Series chassis is comprised of high-strength galvanized steel cabinetry, with an electrical access panel, compressor enclosure, male NPSH water connection fittings, high- and low- voltage wire harnesses and a 1″ (25mm) filter. It is equipped with a standard CXM controller, loss-of-charge and high-pressure switches, a water coil low-temperature cutout, lockout safety circuit reset (at thermostat or disconnect), LED fault indication light, five-minute anti-short cycle, random start, high- and low-voltage protection, condensate overflow protection and a 24VAC or dry contact for the alarm.
The sealed and tested refrigerant circuit includes an expansion valve metering device, high- and low-side Schrader ports and interconnecting copper tubing through which environmentally friendly EarthPure® HFC-410A refrigerant is circulated. A 4-way, pilot-operated reversing valve, tube-in-tube water-to-refrigerant coil, and optional high-density noise suppressant lining in the compressor compartment complete the chassis design, which is compatible in WLHP, GWHP and GLHP applications.
An outer galvanized steel cabinet with powder coat-finished drain pain features electrical and blower access panels and foil-faced fiberglass insulation. Field-selectable supply air openings allow for maximum installation flexibility on the jobsite, and a terminal block located inside the control box facilitates simplified field wiring connections. TSM Series units additionally include a multiple-speed, permanently lubricated PSC direct-drive blower motor, full port shut-off valves with memory stop, stainless steel braided hose kits and an optional pre-programmed, variable speed high-efficiency ECM motor for optimum CFM.
ClimateMaster, Inc. manufactures water-source and geothermal heat pumps, which are considered to be the most energy efficient and environmentally friendly type of air conditioning and heating products available on the market today. ClimateMaster, Inc. is headquartered in Oklahoma City, Oklahoma. For more information, visit www.climatemaster.com.